| • |
1 x High Quality Stainless Steel Housing. |
| • |
1 x Black plastic wall bracket and screws. |
| • |
1 x Stainless Steel Braided hose - fits between the original stop tap and |
| |
inlet side of the new housing. |
| • |
1 x Stainless Steel Braided hose - fits from the outlet side of the new |
| |
housing on to the green pipe to the tap.
|
| • |
1 x Push fit connecter |
| • |
Full fitting instructions |
|
To maintain the quality of drinking water through the Triflow/Trispray/Little Butler & the Carron Phoenix Tripure Water Filter tap system, you must change the filter cartridge at regular six monthly intervals.
From our own survey with Triflow owners and users, we have found that many, tend to put off changing the cartridge, because the process is a pain, the bottom part of the white plastic housing practically welds itself to the top and what should be an easy operation becomes a difficult one, especially for the elderly or users with poor grip.
The new Franke Triflow System as supplied today in it’s complete form, has a new upgraded Stainless Steel Cartridge Housing, with a quarter turn quick release action, making the removal and renewal of the filter cartridge a lot quicker and easier job, taking no more than a couple of minutes to change.
This new Stainless Steel housing unit, until now, has not been available to purchase on it’s own.
We are offering this genuine Franke Stainless Steel Housing as a DIY upgrade kit, it is available from stock for immediate delivery.
The upgrade is simple to install and no specialist tools are required, it can be easily fitted by any average DIY person in approximately 15 - 20 minutes.
Our introductory price for this new
upgrade is £85.00 plus £10.00
delivery
(mainland UK) To purchase go to - CLICK HERE
If you require further details on this
product or wish to order, please do not
hesitate to contact us on 01332 875 586
Please note: The Housing Upgrades do not come with a new cartridge as standard.
If your cartridge as fitted into your
existing white plastic housing, is a
franke FRX02 or a Doulton Ultracarb,
and is less than six months old, It can
be refitted into the new housing for
it’s
remaining six months lifespan.
If you have purchased
and fitted a Doulton Supercarb with
the rounded end, in to your existing
white plastic housing - this will not
fit into the new housing, you will
need to purchase a Doulton Ultracarb.
- follow
this link - CLICK
HERE
If you require further
supplies of cartridges, we offer discounts
for quantity, please go to our
cartridge section - follow this link
- CLICK
HERE
The upgrade housing is only available for the UK market at the moment, however we welcome enquiries from the US
The Sink Shop Ltd
A Leading Franke Specialist in the UK |